Online USV XANTO E 1000, User Manual

Page: 71 / 120

T R O U B L E S H O O T I N G
71 / 120
ZE1000-3000_manual_ger_eng_it_V1.0.3
........................................................................
R. Kistler
7. Troubleshooting
ZINTO E is designed for independent operation and automatically
indicates any problems on the display.
7.1 Warning messages
Alarm signal
or status Possible causes Measure
Battery mode
bATT
Audio signal eve-
ry 4 seconds
A power failure has oc-
curred in the UPS system is
running in battery mode. The UPS system supplies the con-
nected loads with battery current.
Prepare the connected load for
shutdown.
Battery mode
Red display
bATL
Audio signal eve-
ry second
The UPS system is running
in battery mode and the bat-
tery charge state is low. The UPS system supplies the con-
nected load with battery current only
briefly. Prepare the connected load
for the immediate shutdown.
Overload
Red display
OVLD
Audio signal eve-
ry second
The output power of the
UPS system has been ex-
ceeded (> 105%). Reduce the connected load.
Short circuit
Red display
OPST
Audio signal eve-
ry second
Short circuit on output of the
UPS system Remove the short circuit at output of
the UPS system
UPS system def.
Red display
FAIL
Permanent
acoustic signal
The UPS system has an in-
ternal fault. Please contact support.
Table 8: Warning messages