Online UPS Specialist OPP Series, Operating Manual

Page: 3 / 52

- 3 - Revision 1.0
Safety Information
Please retain this user manual in close proximity of the UPS
for future reference.
Since the UPS unit operates from mains power and contains a
number of high current back-up batteries, the information in this
chapter is important to all personnel involved. Please take the
time to read this section before unpacking, installation and
operation of this UPS.
Storage and transportation
Because of the high energy stored within the batteries, the UPS
equipment must be handled with due care and attention. The
UPS must always be kept in the position marked on the external
packaging and must not be dropped.
Installation
Do not operate the equipment in the presence of flammable
gases or fumes. Operation of any electrical equipment in such
an environment constitutes a safety hazard. Do not place the
UPS in an unventilated room or enclosure.
The UPS must be installed in accordance to the instructions
within this manual. Failure to recognise the electrical hazards
could prove fatal.
Do not remove or unplug the input cord when the UPS is turned
on. This removes the safety ground from the UPS and the
equipment connected to the UPS.
Do not open the UPS cabinet. Some components inside the
UPS cabinet carry high voltage. To touch them may prove fatal.
All operations inside the UPS must be carried out by an
authorised service engineer from the manufacturer or agent
authorised by the manufacturer.