Online UPS Specialist Pty Ltd PP10KL, User Manual

Page: 25 / 39

- 22 -
7.panel indicator status is as the right figure:
(1) UPS running status:
Utility power is normal, UPS
runs abnormally and convert to
be utility powered.
(2) handling way:
Please refer to flow Chart 4 of
status handling.
8.panel indicator status is as the right figure:
(1) UPS running status:
Utility power is disconnected,
UPS is battery powered and load
is full load. Buzzer beeps once
every four seconds.
The indicator of battery energy
flashes every four seconds
(buzzer and indicator stop beep
and flash 90s later).
(2) Handling way: If utility is
(3) disconnected normally, please remove non-critical loads to
increase used time. If it is disconnected abnormally, please
refer to flow Chart 1 of status handling.
Figure 28
Figure 29