Online Electronics 4003 MAGSIG, Operating Manual

Page: 32 / 36

4003_5001_D02 Page 31 of 35
5.3. DEVICE DISPLAY INFORMATION
Referring to the graphic above, at the very top of the screen, BATTERY LEVEL, SIGNAL
STRENGTH, CONNECTION STATUS and the ANDROID MENU will be displayed.
If you select the ANDROID MENU function, a window will open that indicate the following:
1. EXPORT and E-MAIL
•
Selecting this option will export the current readings in CSV format. If you ask the
unit later to “view all”, a listing of all the rec orded events will also be displayed.
2. IMPORT
•
Allows the import of a CSV file with pre-loaded settings
3. HELP
•
Displays the current version of the Bluetooth Software
4. EXIT
5.3.1. DEVICE CHANGEABLE FIELDS
The following fields are user changeable:
1.
System Date/Time – Tabular Entry
2.
Language – Multiple Choice
3.
Auto Power off – Tabular Entry
4.
Stabilization Delay – Tabular Entry
5.
Detect Delay – Tabular Entry
6.
Low Power Mode – Sliding switch
7.
Relay Polarity – Sliding switch
8.
Remote Sensor – Sliding switch
9.
SD Card Logging – Sliding Switch
10.
LED Flash – Sliding Switch
11.
Baud Rate – Tabular Entry
12.
Parity – Tabular Entry
13.
Slave ID – Tabular Entry
14. Threshold – Tabular Entry
5.3.2. INDICATION ONLY
The following fields are indication only:
1. Pig Detected – either red or green
2. Event Peak Value
3. Difference
4. Current Flux
5. Battery Volts
5.3.3. LOGGED DATA
100 Event Log
– you can address each logged event by using left or right arrow keys or “View
All” can be selected in which case they will cycle thr ough completely. The values will indicate
date and time of the event as well as the logged Milligauss level. At the end of the cycle the
units will display the full list which you can print screen or if you export at this point a
complete list will export with other readings via CSV file or to an SD Card.