the coffee switch and steam switch for 3 seconds at the same time under the standby mode, and then
their corresponding indicators quickly blink for 3 times, which means the descaling warning is canceled
and the working cycle is zeroed.
TROUBLE SHOOTING
Symptom
Cause
Corrections
The metal parts in the tank
have rust.
The descaler is not recommended
type. It may corrode the metal parts in
the tank.
Use
the
descaler
recommended
by
manufacturer.
Water leaks from the bottom
of coffee maker.
There is much water in the drip tray.
Please clean the drip tray.
The coffee maker is malfunction.
Please
contact
with
the
authorized service facility for
repairing.
Water leaks out of outer side of
filter.
There is some coffee powder on
filter edge.
Get rid of them.
Acid (vinegar) taste exists in
Espresso coffee.
No
clean
correctly
after
cleaning mineral deposits.
Clean coffee
maker
per
the
content in “before the first use”
for several times.
The coffee powder is stored in a
hot, wet place for a long time.
The coffee powder turns bad.
Please use fresh coffee powder,
or store unused coffee powder in
a cool, dry place. After opening a
package of coffee powder, reseal
it tightly and store it in a
refrigerator
to
maintain
its
freshness.
The coffee maker cannot work
any more.
The power outlet is not plugged
well.
Plug the power cord into a wall
outlet correctly, if the appliance
still
does
not
work,
please
contact
with
the
authorized
service facility for repairing.
The steam cannot froth.
The steam ready indicator is not
illuminated.
Only
after
the
steam
ready
indicator
is
illuminated,
the
steam can be used to froth.
The container is too big or the
shape is not fit.
Use high and narrow cup.
You have used skimmed milk
Use whole milk or half-skimmed
milk
Do not take apart the appliance by yourself if the cause of failure is not found, you had better
contact certified serving center.
Environment friendly disposal
