and if desired, sprinkle the froth with a little cocoa powder.
8
、
Press the
Power
switch to cut the power source off. All indicators will be extinguished.
WARNING
: After finish the “Steam” function, press the coffee switch, if the coffee indicator and
steam indicator blink fast, it means that the temperature of the appliance is too high and the appliance
needs to be turned off and have a rest for more than 5 minutes, or you can activate the “Hot water”
function to cool down the appliance.
CLEANING AND MAINTENANCE:
1
、
Cut off power source and let the coffee maker cool down completely before cleaning.
2
、
Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray
and removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
3
、
Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then you can
clean it with cleanser, but at last you must rinse with clear water.
4
、
Clean all the attachments in the water and dry thoroughly.
CLEANING MINERAL DEPOSITS
1.Fill the tank with water and descaler to the MAX level ( the scale of water and descaler is 4:1, the
detail refers to the instruction of descaler. Please use “household descaler”, you can use the citric acid
(obtainable from chemist’s or drug stores) instead of the descaler (the one hundred parts of water and
three parts of citric acid).
2.According to the program of pre-heating, put the metal funnel (no coffee powder in it) and jug in
place. Brewing water per “ PRE-HEATING”.
3. After pressing the power switch one time, and then its red lamp will be flashing, you should press the
coffee switch, maker sure the coffee/steam selector , when there is water flowing out and close the
pump, and wait for a moment, the coffee maker begins to be heated.
4. When the lamp in power switch is illuminated, it shows the heating is finished. Pressing the coffee
switch and make two cups coffee (about 2Oz). Then close the pump and wait for 5s.
5. Press the steam selector, the indicator in the steam switch will be flashing, waiting for until the
indicator in the steam selector is illuminated. Make steam for 2 min by turning the steam control knob,
then turn the steam control knob to “o” position to stop making steam. Press the Power switch for stop
the unit immediately, make the descalers deposit in the unit at least 15 minutes.
6. Restart the unit and repeat the steps of 4-6 at least 3 times.
7. Then press the coffee/steam selector , the lamp in coffee switch will be illuminated, then press the
coffee switch to brew until no descaler is left.
8. Then brew coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-6 for 3
times (it is unnecessary to wait for 15 minutes in step of 6), then brew until no water is left in the tank.
9. Repeat the step of 9 at least 3 times to make sure the piping is clean.
10. Follow the operation as below to cancel the descaling warning after finish descaling. Hold and press
