Onkyo TX-SV353, Instruction Manual

Page: 6 / 28

6
Connecting audio equipment
PHONO CD TV/AUX TAPE
GND
R
L
R
L
ANTENNA
FM
75
Ω
AM
(PLAY)
INPUT
(REC)
OUTPUT
VIDEO-1
VIDEO-1
INPUT
INPUT
VIDEO-2
VIDEO-2
INPUT
INPUT OUTPUT
OUTPUT
MONITOR
OUTPUT
V V
SUB-
WOOFER
PRE OUT
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
FRONT SPEAKERS
L
L
R
R
REAR SPEAKERS CENTER
SPEAKER L R
A
B
A
B
RATING:
AUDIO VIDEO CONTROL
RECEIVER
MODEL NO.
TX-SV353
120V 220-230V
VOLTAGE SELECTOR
REMOTE
CONTROL
AC OUTLETS
SWITCHED
TOTAL 100W MAX.
10kHz 9kHz
AM FREQ. STEP
MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.
“DOLBY”, THE COUBLE-D SYMBOL AND “PRO LOGIC”
ARE TRADEMARKS OF DOLBY LABORATORIES
LICENSING CORPORATION.
CAUTION: SPEAKER IMPEDANCE
FRONT A OR B: 6 OHMS MIN. / SPEAKER
FRONT A+B: 12 OHMS MIN. / SPEAKER
CENTER / REAR: 6 OHMS MIN. / SPEAKER
OUTPUT
R L
R L
R L
LINE IN LINE OUT
PHONO
OUT
●
Refer to the instruction manual of each component when making connections.
●
On each pair of connectors, the lower connector (red and marked R) corresponds to
the right channel and the upper connector (white and marked L) to the left channel.
●
Insert the plugs and connectors securely. Remember that improper connection can
result noise, poor performance, or damage to the equipment.
To wall outlet
CAUTION:
Do not plug in the power
cord until all connec-
tions have been made.
Turntable
CD player Tape deck
L (Left)
R (Right)
L
R
Improper connection
Insert completely
Cassette tape decks and compact disc players equipped with
an Onkyo
connector can be operated using the remote
controller included with this unit.
To enable remote controller operation of other components,
connect the remote controller cable as shown at the left.
NOTE:
●
To enable proper remote controller operation, both the
cables and the audio cables must be connected to the
units.
●
This unit’s remote controller cannot be used to control
Onkyo turntables.
●
An remote controller cable equipped with 1/8” (3.5
mm) mini jacks is included with any other component
installed with an
connector.
The direct function feature
When a compact disc player and a tape deck with the
connector are connected together, you can use the direct
function feature.
When you operate the desired component (compact disc
player or tape deck), The TX-SV353 Input Selector automat-
ically switches to that component.
In this way, it is not necessary to operate the Input Selector
to change listening sources.
Remote controller connections
REMOTE
CONTROL
AC OUTLETS
SWITCHED
TOTAL 100W MAX.
TX-SV353