Onkyo TX-SV353, Instruction Manual

Page: 12 / 28

12
Listening to your favorite source
1. Press the SPEAKERS A button.
SPEAKERS A indicator lights up.
2. Press the desired input selector button (e.g. PHONO).
The appropriate letters (e.g. PHONO) appear on the display.
Confirm that the TAPE MON. indicator is off when a
source other than the TAPE (MONITOR) has been
selected. Also check to make sure the audio muting is off.
3. Start the selected input source playing.
Follow the operating instructions of that unit.
4. Adjust the volume to appropriate level using the
MASTER VOLUME control knob or VOLUME
π (up)/ † (down) buttons on the remote controller.
5. Adjust the tone controls for your desired tone.
SPEAKERS A: This button turns on or off the speakers con-
nected to the FRONT SPEAKERS A, CENTER SPEAKER
and REAR SPEAKERS terminals. When the speakers are
turned on, the SPEAKERS A indicator lights up.
SPEAKERS B: This button turns on or off the speakers con-
nected to the FRONT SPEAKERS B terminals. When the
speakers are turned on, the SPEAKERS B indicator lights up.
Note:
When the surround sound has been activated, you cannot use
A and B speakers simultaneously.
Treble and Bass are effectively only for the Front left and
right speakers.
The best results are obtained from DOLBY PRO LOGIC
Surround when the center and left and right front speakers
contain the same amounts of mid and high frequencies. As
the Treble and Bass control do not affect the Center speaker,
adjust the tone controls for the left and right front speakers to
match the sound given by the center speaker. Because of
this, we recommend the use of a good quality center speaker.
BASS: Adjust to strengthen or weaken bass response.
TREBLE: Adjust to strengthen or weaken treble response.
BALANCE: Adjust the relative volume levels of the right
and left front speaker systems and headphones.
Basic operations
Speaker selector
Adjusting the tone and balance
2 5
BALANCE TREBLE BASS
SYSTEM
ON OFF
SPEAKERS A
SPEAKERS B
PHONES
DOLBY SURROUND
P R O • L O G I C
AM FM TAPE(MONITOR) TV/AUX PHONO / 1 VIDEO VDP / 2 VIDEO VCR
MAX MIN
AUDIO VIDEO CONTROL RECEIVER
TX-SV 353
L R
C D
MASTER VOLUME
STAND-BY
1 2 3
4 5 6
7 8 9
GROUP 0/10 SCAN
MEMORY FM MUTE / MODE
CLEAR
CENTER
MODE
SURROUND
MODE DELAY TIME
TUNING DIRECT TUNING DOWN UP
1
4
POWER SLEEP
TV/AUX VIDEO-1 VIDEO-2
TAPE PHONO C D
INPUT SELECTOR
C D
DISC
VOLUME
DECK-B
TUNER
POWER
POWER
C H
DECK-A TUNER
PRESET
MUTING
LEVEL
REMOTE CONTROLLER
TEST
TONE
CH SEL
SENDING/
LEARNED LEARN SEND
GROUP
SUR
MODE
PROGRAMMABLE AREA TV/VIDEO
MULTI-CH
INPUT
RC-383M
4
2
SPEAKERS A
SPEAKERS B
BALANCE
L R
TREBLE
– +
BASS
– +