76
Advanced Setup
—Continued
5
Use the Up and Down [
q
]/[
w
] but-
tons to select “Front”, and then
use the Left and Right [
e
]/[
r
]
buttons to select a crossover fre-
quency.
Note:
If the “Subwoofer” setting in step 4 is
set to
“No”
, this setting is fixed at “Full
Band”.
6
Use the Up and Down [
q
]/[
w
] but-
tons to select “Center”, and then
use the Left and Right [
e
]/[
r
]
buttons to select a crossover fre-
quency.
If no center speaker is connected, select
“None”.
Note:
If the
“Front”
setting in step 5 is set to
anything other than
“Full Band”
,
“Full
Band”
cannot be selected here.
7
Use the Up and Down [
q
]/[
w
] but-
tons to select “Surround”, and
then use the Left and Right [
e
]/
[
r
] buttons to select a crossover
frequency.
If no surround left and right speakers
are connected, select “None”.
Note:
If the
“Front”
setting in step 5 is set to
anything other than
“Full Band”
,
“Full
Band”
cannot be selected here.
8
Use the Up and Down [
q
]/[
w
] but-
tons to select “Surr Back”, and
then use the Left and Right [
e
]/
[
r
] buttons to select a crossover
frequency.
If no surround back speakers are con-
nected, select “None”.
Notes:
• If the “Surround” setting in step 7 is
set to “None”, this setting cannot be
selected.
• If the “Surround” setting in step 7 is
set to anything other than “Full
Band”, “Full Band” cannot be
selected here.
• If the “Speakers Type” setting is set
to “Bi-Amp” (page 47), or Powered
Zone 2 is being used (page 100), this
setting cannot be selected.
9
Use the Up and Down [
q
]/[
w
] but-
tons to select “Surr Back Ch”,
and then use the Left and Right
[
e
]/[
r
] buttons to select:
1ch:
Select if one surround back
speaker is connected.
2ch:
Select if two (left and right)
surround back speakers are
connected.
Note:
If the
“
Surr Back
”
Setting in step 8 is
set to
“None”
, this setting cannot be
selected.
Continue with step 10 on the next page.
TX-SR806_En.book Page 76 Monday, August 4, 2008 10:25 AM
Summary of Contents for TX SR806
Page 123: ...123 Memo...
