56
Basic Operations
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Selecting the Input Source
1
Use the AV receiver/AV amplifier’s input selector buttons to select
the input source.
To select the input source with the remote controller, use the
INPUT SELECTOR buttons.
2
Start playback on the source component.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver/AV amplifier’s
HDMI OUT, COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
3
To adjust the volume, use the MASTER VOLUME control, or the
remote controller’s VOL [
q
]/[
w
] button.
The volume can be set to
−
∞
dB,
−
81.5 dB t18.0 dB (relative dis-
play).
The AV receiver/AV amplifier is designed for home theater enjoyment. It has
a wide volume range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See “Volume
Setup” on page 91.
4
Select a listening mode and enjoy!
See “Using the Listening Modes” on page 64.
1
3
MULTI CH
3
1
MULTI CH
or
Remote
controller
AV receiver/
AV amplifier
or
AV receiver/
AV amplifier
Remote
controller
TX-SR806_En.book Page 56 Monday, August 4, 2008 10:25 AM
Summary of Contents for TX SR806
Page 123: ...123 Memo...
