Onkyo TX-NR5100 Instruction Manual Download

Page: 115 / 159

115

Setup

6. Miscellaneous

3. Firmware Update

Change the settings for Firmware Update.

Update Notice (Default Value: Enable)

Availability of a firmware update is notified via network.

Enable

Notify updates

Disable

Do not notify updates

Version (Default Value: -)

The current firmware version is displayed.

Update via NET (Default Value: -)

Press ENTER to select when updating the firmware via network.

• This setting cannot be selected if you do not have Internet access or there is

no updatable firmware.

Update via USB (Default Value: -)

Press ENTER to select when updating the firmware via USB.

• This setting cannot be selected if a USB storage device is not connected or

there is no updatable firmware in the USB storage device.

• Wait for a while if "Firmware Update" cannot be selected. It can be selected

when the network function is activated.

4. Initial Setup

Make the initial setup from the setup menu.

• Wait for a while if "Initial Setup" cannot be selected. It can be selected when

the network function is activated.

5. Lock

Lock the Setup menu so that the settings cannot be changed.

Setup Parameter (Default Value: Unlocked)

Lock the Setup menu so that the settings cannot be changed.

Locked

The menu is locked.

Unlocked

The menu is unlocked.

6. Factory Reset

All the settings are restored to factory defaults.

Factory Reset (Default Value: -)

All the settings are restored to factory defaults.

Select "Start" and press ENTER.

• If "Factory Reset" is performed, your settings are restored to the default

values. Be sure to note down your setting contents beforehand.

Summary of Contents for TX-NR5100
































































































































































Search results

Summary of Contents for TX-NR5100

Reviews:

Related manuals for TX-NR5100

Brands by name

Popular brands

Onkyo TX-NR5100, Instruction Manual

Search results

Summary of Contents for TX-NR5100

Reviews:

Related manuals for TX-NR5100

Brands by name

Popular brands