35
Basic Operation
—Continued
■
Manual Tuning Mode
Notes:
• The American model changes FM frequency in
0.2 MHz steps, 10 kHz steps for AM.
• In Manual Tuning mode, FM stations will be in mono.
Switch back to Auto Tuning mode for stereo.
Tuning into weak FM stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Presetting Radio Stations
You can store up to 30 radio stations as presets.
Selecting Preset Stations
1
Press the REMOTE MODE [AMP]
button, then press the [TUN]
INPUT SELECTOR button repeat-
edly to select either AM or FM.
2
Press the [TUN M] button repeat-
edly until the AUTO indicator dis-
appears from the display.
Manual Tuning mode is now selected.
3
Use the [TUN–] and [TUN+] but-
tons to tune into a radio station
by frequency.
Press and hold these buttons to change
the frequency continually. Press once to
change the frequency one step at a time.
Check your local radio guide for the
frequencies of the stations available in
your area.
TUN
AMP
TUNER
TUN
+
TUN
-
1
Tune into the station that you
want to store as a preset.
2
Press the [P MEM] button.
The MEMORY indicator appears and
the preset number flashes.
3
While the MEMORY indicator is
displayed, use the CH [+/–]
button to select a preset from 1
through 30.
In this example, preset #3 is selected.
4
Press the [P MEM] button again
to store the station.
The station is stored and the preset
number stops flashing.
Repeat this procedure for all of your
favorite radio stations.
1
Press the REMOTE MODE [AMP]
button, then press the [TUN]
INPUT SELECTOR button repeat-
edly to select either AM or FM.
2
Use the CH [+/–] button to select
the presets.
P MEM
MEMORY
+
-
DISC
CH
P MEM
TUN
AMP
TUNER
+
-
DISC
CH
TX-LR552̲En.book Page 35 Thursday, August 5, 2004 1:07 PM