background image

76

Advanced Setup

—Continued

Here you can set listening mode-related settings and 
functions.

Note:

This procedure can also be performed on the AV 
receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button. 

The Audio Adjust functions are explained below.

Tone Control Settings

You can adjust the bass and treble for the front speakers, 
except when the Direct or Pure Audio (not North Amer-
ican models) listening mode is selected.

Front Bass

You can boost or cut low-frequency sounds output by the 
front speakers from –10 dB to +10 dB in 2 dB steps.

Front Treble

You can boost or cut high-frequency sounds output by 
the front speakers from –10 dB to +10 dB in 2 dB steps.

Input Channel Settings

Multiplex Input Ch

This setting determines which channel is output from a 
stereo multiplex source. Use it to select audio channels 
or languages with multiplex sources, multilingual TV 
broadcasts, and so on.

Main:

The main channel is output (default).

Sub:

The sub channel is output.

Main/Sub:

Both the main and sub channels are output.

Mono Input Ch

This setting specifies the channel to be used for playing 
any 2-channel digital source such as Dolby Digital, or 2-
channel analog/PCM source in the Mono listening 
mode.

L+R:

Both the left and right channels are output 
(default).

L:

Only the left channel is output.

R:

Only the right channel is output.

Audio Adjust Functions

1

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.

The main menu appears onscreen.

2

Use the Up and Down [

]/[

buttons to select “3. Audio 
Adjust,” and then press [ENTER].

The Audio Adjust menu appears.

3

Use the Up and Down [

]/[

buttons to select the functions, 
and then press [ENTER].

The function menu you selected 
appears.

4

Use the Up and Down [

]/[

buttons to select the settings, 
and use the Left and Right [

]/

[

] buttons to set them.

The settings are explained below.

5

When you’ve finished, press the 
[SETUP] button.

The setup menu closes.

3. Audio Adjust

1. Tone Control
2. Multiplex/Mono
3. PL II x/Neo:6
4. Dolby EX
5. Theater-Dimensional

Summary of Contents for SR605S - AV Receiver





































































































Reviews: