47
First Time Setup
—Continued
If you connect your TV to the COMPONENT VIDEO
OUT, set the HDMI Monitor setting to No so that the
onscreen setup menus are displayed and composite
video and S-Video sources are upconverted* and output
by the COMPONENT VIDEO OUT.
If you connect your TV to the HDMI OUT, set the
HDMI Monitor setting to Yes so that the onscreen setup
menus are displayed and composite video, S-Video, and
component video sources are upconverted* and output
by the HDMI OUT. The onscreen setup menus are dis-
played on the HDMI OUT only.
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
HDMI Monitor
1, 5
2-4
2, 3
1
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
IN
OUT
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “1. Input/Out-
put Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
3
Use the Up and Down [
]/[
]
buttons to select “1. Monitor
Out,” and then press [ENTER].
The Monitor Out menu appears.
4
Use the Left and Right [
]/[
]
buttons to select:
No:
Select this if your TV is con-
nected to the COMPONENT
VIDEO OUT.
Yes:
Select this if your TV is con-
nected to the HDMI OUT.
5
Press the [SETUP] button.
The Setup menu closes.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component
Video Input
4. Digital Input
1–1. Monitor Out
HDMI Monitor
No
Summary of Contents for SR605S - AV Receiver
Page 98: ...98 MEMO...
Page 99: ...99 MEMO...
