![background image](http://html1.mh-extra.com/html/onkyo/pr-sc5508/pr-sc5508_instruction-manual_1636835099.webp)
99
En
The AV controller can upconvert component video, S-
Video, and composite video sources for display on a TV
connected to the HDMI output. However, if the picture
quality of the source is poor, upconversion may make the
picture worse or disappear altogether.
In this case, try the following:
Note
• If “
Monitor Out
” setting is set to “
Analog
”, press
VCR/DVR
and
RETURN
on the AV controller at the same time. Select
“
Skip
” in the “
VideoProcessor
” setting on the display. To reset
back to the original setting, press the same button at the same
time. If you select “
Use
”, the AV controller will output video
signals from the video processor.
Important Note Regarding Video Playback
1
If the video source is connected to a component
video input, connect your TV to the
COMPO-
NENT VIDEO MONITOR OUT
.
If the video source is connected to an S-Video input,
connect your TV to a
MONITOR OUT S
.
If the video source is connected to a composite video
input, connect your TV to
MONITOR OUT V
.
2
On the main menu, select “Input/Output Assign”,
and then select “HDMI Input”.
Select the relevant input selector, and assign it to
“- - - - -” (
➔
45
).
3
On the main menu, select “Input/Output Assign”,
and then select “Component Video Input” (
➔
46
):
If the video source is connected to
COMPO-
NENT VIDEO IN 1
, select the relevant input
selector, and assign it to “
IN 1
”.
If the video source is connected to
COMPO-
NENT VIDEO IN 2
, select the relevant input
selector, and assign it to “
IN 2
”.
If the video source is connected to
COMPO-
NENT VIDEO IN 3
, select the relevant input
selector, and assign it to “
IN 3
”.
If the video source is connected to an S-Video
input or composite video input, select the relevant
input selector, and assign it to “
- - - - -
”.