![background image](http://html1.mh-extra.com/html/onkyo/pr-sc5508/pr-sc5508_instruction-manual_1636835064.webp)
64
En
Re-EQ
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
■
Re-EQ
`
Off
:
Re-EQ Function off.
`
On
:
Re-EQ Function on.
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Multichannel, DTS, DTS-HD High Reso-
lution Audio, DTS-HD Master Audio, DTS Express,
DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby
PLIIx Movie, Neo:6 Cinema and 5.1-channel
Neo:6, and Neural Surround.
■
Re-EQ(THX)
`
Off
:
Re-EQ (THX) Function off.
`
On
:
Re-EQ (THX) Function on.
This function can be used with the following listening
modes: THX Cinema, THX Surround EX, and
THX Ultra2 Cinema.
Note
• Settings for the Re-EQ function are kept in each listening mode.
However, in THX listening mode, when the AV controller is
turned off, it will return to “
On
”.
• This setting cannot be used while a pair of headphones is con-
nected.
Audio Selector
You can set priorities of audio output when there are both
digital and analog inputs.
■
Audio Selector
`
ARC
:
The audio signal from your TV tuner can be sent to
the
HDMI OUT MAIN
of the AV controller.
*1
With this selection the TV’s audio can be automati-
cally selected as a priority among other assignments.
`
HDMI
:
This can be selected when
HDMI IN
has been
assigned as an input source. If both HDMI (
HDMI
IN
) and digital audio inputs (
COAXIAL IN
or
OPTI-
CAL IN
) have been assigned, HDMI input is auto-
matically selected as a priority.
`
COAX
:
This can be selected when
COAXIAL IN
has been
assigned as an input source. If both coaxial and
HDMI inputs have been assigned, coaxial input is
automatically selected as a priority.
`
OPT
:
This can be selected when
OPTICAL IN
has been
assigned as an input source. If both optical and
HDMI inputs have been assigned, optical input is
automatically selected as a priority.
`
Multich
:
The AV controller always outputs analog signals
from multichannel analog input.
`
Balance
:
The AV controller always outputs analog signals
from balanced input.
`
Analog
:
The AV controller always outputs analog signals.
Note
• The setting is stored individually for each input selector.
• This setting can be made only for the input source that is
assigned as
HDMI IN
,
COAXIAL IN
, or
OPTICAL IN
.
• To select the digital audio input, see “Digital Audio Input” for
more detail (
➔
47
).
• To select “
Multich
”, you must assign the multichannel input
(
➔
47
).
• To select “
Balance
”, you must assign the balanced input (
➔
47
).
*1
You can select “
ARC
” if you select the
TV/CD
input selector.
But you cannot select it if you’ve selected “
Off
” in the “
Audio
Return Channel
” setting (
➔
61
).
Setting the Incoming Digital Signal (Fixed
Mode)
By pressing
ENTER
while selecting “
HDMI
”, “
COAX
”,
“
OPT
” in the “
Audio Selector
”, you can specify the input
signal in the Fixed Mode. Pressing
ENTER
again allows
you to return to the “
Audio Selector
” setting.
Normally, the AV controller detects the signal format
automatically. However, if you experience either of the
following issues when playing PCM or DTS material, you
can manually set the signal format to PCM or DTS.
• If the beginnings of tracks from a PCM source are cut
off, try setting the format to PCM.
• If noise is produced when fast forwarding or reversing a
DTS CD, try setting the format to DTS.
■
Fixed Mode
`
Auto
:
The format is detected automatically. If no digital
input signal is present, the corresponding analog
input is used instead.
`
PCM
:
Only 2-channel PCM format input signals will be
heard. If the input signal is not PCM, the
PCM
indi-
cator will flash and noise may also be produced.
`
DTS
:
Only DTS (but not DTS-HD) format input signals
will be heard. If the input signal is not DTS, the
DTS
indicator will flash and there will be no sound.
Note
• The setting is stored individually for each input selector.
• The setting will be reset to “
Auto
” when you change the setting
in the “
Audio Selector
” (
➔
64
).