MD-101A
WP
0J12
ADJUSTMENT PROCEDURES-3
Preparation of adjustment
1. Make the extended JIG and connection.
Extended JIG (KIT)
Part No.0J12
Attach the wire to required point
so that it may be easy to connect
measuring instrument etc.
PC board
Part No.NCJIG-0J12
Socket
Part No.25052307
Flexible flat cable
Part No. 0F001
Connect to the MD mechanism
Jumper wire
Connect to the
P000A
on the JIG.
Connect to the
CN110
on the MD mechanism.
back side view
2. Setting the WP terminal.
Extended JIG
Connect the the chassis earth
Be sure to do this work before adjustment.
An adjustment value cannot be set up unless you do this work.
(An adjustment value is not memorized by EEP ROM on MD mount.)