Onkyo HT-R980, Instruction Manual

Page: 68 / 148

68
En
The AV receiver can upconvert component video and
composite video sources for display on a TV connected to
the
HDMI OUT
. However, if the picture quality of the
source is poor, upconversion may make the picture worse
or disappear altogether.
In this case, try the following:
Important Note Regarding Video Playback
1
If the video source is connected to a component
video input, connect your TV to the
COMPO-
NENT VIDEO OUT .
If the video source is connected to a composite video
input, connect your TV to the
MONITOR OUT V .
2
On the main menu, select “1. Input/Output
Assign”, and then select “2. HDMI Input”.
Select the relevant input selector, and assign it to
“- - - - -” (
➔
37
).
3
On the main menu, select “1. Input/Output
Assign”, and then select “3. Component Video
Input” (
➔
38 ):
If the video source is connected to COMPONENT
VIDEO IN 1 , select the relevant input selector, and
assign it to “ IN1 ”.
If the video source is connected to
COMPONENT
VIDEO IN 2
, select the relevant input selector, and
assign it to “ IN2 ”.
If the video source is connected to composite video
input, select the relevant input selector, and assign it
to “
- - - - - ”.