Onkyo HT-R980, Instruction Manual

Page: 37 / 148

37
En
Explanatory Notes
Main Menu Input/Output Assign
Monitor Out
You can specify the output resolution for the
HDMI OUT
and COMPONENT VIDEO MONITOR OUT and have
the AV receiver upconvert the picture resolution as neces-
sary to match the resolution supported by your TV.
■
Resolution
`
Through :
Select this to pass video through the AV receiver at
the same resolution and with no conversion.
`
Auto :
Select this to have the AV receiver automatically
convert video at resolutions not supported by your
TV.
`
480p ( 480p/576p ):
Select this for 480p or 576p output and video con-
version as necessary.
`
720p :
Select this for 720p output and video conversion as
necessary.
`
1080i :
Select this for 1080i output and video conversion as
necessary.
`
1080p :
Select this for 1080p output and video conversion as
necessary.
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to
HDMI
IN 2
, you must assign “ HDMI2 ” to the “ BD/DVD ” input
selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, composite video and component video
sources can be upconverted
* to HDMI. See “Video Con-
nection Formats” for more information on video signal
flow and upconversion (
➔
18 ).
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , AUX ,
TV/CD , PORT
`
HDMI1 , HDMI2 , HDMI3 , HDMI4 :
Select a corresponding HDMI input that the video
component has been connected.
`
- - - - - :
Select this to output composite video and component
video sources from the
HDMI OUT . The video sig-
nal from HDMI output is configured in “Component
Video Input” (
➔
38 ).
• Each HDMI input cannot be assigned to two input selec-
tors or more. When HDMI1 - HDMI4 have already
been assigned, you must set first any unused input selec-
tors to “
- - - - - ” or you will be unable to assign HDMI1
- HDMI4 to input selector.
Note
• When an HDMI IN is assigned to an input selector as explained
here, the same
HDMI IN
will be set as a priority in the “Digital
Audio Input” (
➔
38 ). In this case, if you want to use the coaxial
or optical audio input, make the selection in the Audio Selector
in the Audio menu (
➔
22
).
• TUNER selector cannot be assigned and is fixed at the “ - - - - - ”
option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
• Do not assign the component connected with the HDMI input to
TV/CD selector when you set “ TV Control ” setting to “ On ”
(
➔
50
). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Input/Output Assign
Subwoofer
Yes :
No :
Main Menu Speaker Setup
b
a
c
a
Menu selection
b
Setting target
c Setting options (default setting underlined)
Select if a subwoofer is connected.
Select if no subwoofer is connected.
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
AUX - - - - -
TUNER - - - - - (Fixed)
TV/CD - - - - -
PORT - - - - -
IN
OUT
Composite video,
component video
Composite video,
component video
HDMI
HDMI