background image

15

En

Connect your components to the appropriate jacks. The default input assignments are shown below.

: Assignment can be changed (

page 40

).

See also: 
• “Connection Tips and Video Signal Path” (

page 70

).

• “About HDMI” (

page 71

)

• “Using an RIHD-compatible TV, Player, or Recorder” (

page 72

).

Audio return channel (ARC) function

Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the 

HDMI OUT

 of the 

AV receiver.
• To use the ARC function, you must select the 

TV/CD

 input selector, your TV must be ARC capable and “

HDMI Ctrl 

(RIHD)

” must be set to “

On

” (

page 48

).

Tip

• To listen to audio received by the 

HDMI IN

 jacks through your TV’s speakers:

– Set the “

HDMI Ctrl (RIHD)

” setting to “

On

” (

page 48

) for an 

p

-compatible TV.

– Set the “

Audio TV Out

” setting to “

On

” (

page 48

) when the TV is not compatible with 

p

, or the “

HDMI Ctrl (RIHD)

” 

setting to “

Off

”.

– Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.
– To listen to TV audio through the AV receiver, see “Connecting Your Components” (

page 16

).

Note

• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV 

screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to 
another input source, this may result in no sound from the AV receiver or the sound may be cut off.

• When  the  “

Audio TV Out

” setting is set to “

On

” (

page 48

) to hear from your TV’s speakers, by controlling the AV receiver’s 

volume, the sound will be output from the AV receiver’s speakers, too. When the 

HDMI Ctrl (RIHD)

” setting is set to 

On

 

(

page 48

to hear from speakers of 

p

-compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers 

will produce sound while the TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, 
change your TV’s settings, or turn down the AV receiver’s volume.

Connecting Components with HDMI

Jack

Components

Assignable

 Input

HDMI IN1

Blu-ray Disc/DVD player

HDMI IN2

VCR or DVD recorder/Digital Video Recorder

HDMI IN3

Satellite/cable set-top box, etc.

HDMI IN4

Game console

Output

HDMI OUT

TV, projector, etc.

Game console

VCR or DVD recorder/Digital Video Recorder

TV, projector, etc.

Satellite/cable set-top box, etc.

Blu-ray Disc/DVD player

Summary of Contents for HT-R648













































































Reviews: