Onkyo HT-R648, Instruction Manual

Page: 40 / 76

40
En
Explanatory Notes
Menu HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to
HDMI
IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input
selector.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , AUX ,
TV/CD , PORT
`
HDMI1 , HDMI2 , HDMI3 , HDMI4 :
Select the corresponding HDMI input, to which the
component has been connected.
`
- - - - - :
Select if you’re not using the HDMI OUT .
Each HDMI input cannot be assigned to two input
selectors or more. When
HDMI1 - HDMI4 have
already been assigned, you must set first any unused
input selectors to “
- - - - - ”, or you will be unable to
assign HDMI1 - HDMI4 to other input selectors.
Note
• When an HDMI IN is assigned to an input selector as explained
here, the digital audio input for that input selector is
automatically set to the same
HDMI IN .
• Do not assign the component connected with the HDMI input to
TV/CD selector when you set the “ HDMI Ctrl (RIHD) ” setting
to “ On ” (
➔
page 48 ). Otherwise, appropriate CEC (Consumer
Electronics Control) operation will not be guaranteed.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
Menu Component
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to
the “ BD/DVD ” input selector.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , AUX ,
TV/CD , PORT
`
IN1 , IN2 :
Select the corresponding video input, to which the
video component has been connected.
`
- - - - - :
Select if you’re not using the
COMPONENT
VIDEO OUT .
Note
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
Menu Digital Audio
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the
OPTICAL IN 1 , you
must assign “ OPTICAL1 ” to the “ TV/CD ” input
selector.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , AUX ,
TV/CD , PORT
`
COAXIAL1 , COAXIAL2 , OPTICAL1 ,
OPTICAL2 :
Select the corresponding digital audio input, to
which the component has been connected.
HDMI Input
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
AUX - - - - -
TV/CD - - - - -
PORT - - - - -
Subwoofer
Yes :
No :
Menu Sp Config
b
a
c
a
Menu selection
b
Setting target
c
Setting options (default setting underlined)
Select if a subwoofer is connected.
Select if no subwoofer is connected.
Component (Component Video Input)
Input selector Default assignment
BD/DVD IN1
VCR/DVR - - - - -
CBL/SAT IN2
GAME - - - - -
AUX - - - - -
TV/CD - - - - -
PORT - - - - -
Digital Audio (Digital Audio Input)
Input selector Default assignment
BD/DVD COAXIAL1
VCR/DVR - - - - -
CBL/SAT COAXIAL2
GAME OPTICAL1
AUX - - - - -
TV/CD OPTICAL2
PORT - - - - -