Controlling Other Components
En-47
Controlling Other Onkyo
Components
You can use the AV receiver’s remote controller to control
your other Onkyo AV components. This section explains
how to enter the remote control code for a component that
you want to control: DVD, CD, etc.
The following
REMOTE MODE
butttons are
preprogrammed with remote control codes for controlling
the components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
indicated pages.
You’ll need to enter a code for each component that you
want to control.
Onkyo components that are connected via
u
are
controlled by pointing the remote controller at the AV
receiver, not the component. This allows you to control
components that are out of view, in a rack, for example.
Preprogrammed Remote Control
Codes
BD/DVD
Onkyo Blu-ray Disc player (
➔
page 49
)
TV/CD
Onkyo CD player (
➔
page 50
)
PORT
Onkyo Universal Port Option (
➔
page 45
)
Entering Remote Control Codes
1
Look up the appropriate remote control code in the
Remote Control Codes for Onkyo Components
Connected via
u
.
2
While holding down the
REMOTE MODE
button to
which you want to assign a code, press and hold
down
DISPLAY
(about 3 seconds).
The remote indicator lights.
Note
• Remote control codes cannot be entered for
RECEIVER
.
• Except for
RECEIVER
remote control codes from any
category can be assigned to the
REMOTE MODE
button.
However, these buttons also work as input selector buttons
(
➔
page 19
), so choose a
REMOTE MODE
button that
corresponds with the input to which you connect your
component. For example, if you connect your CD player to
the CD input, choose
TV/CD
when entering its remote
control code.
3
Within 30 seconds, use the number buttons to enter
the 5-digit remote control code.
The remote indicator flashes twice.
If the remote control code is not entered successfully,
the remote indicator will flash once slowly.
Remote Control Codes for Onkyo
Components Connected via
u
1
Make sure the Onkyo component is connected with
an
u
cable and an analog audio cable (RCA).
See “Connecting Onkyo
u
Components” for details
(
➔
page 16
).
2
Enter the appropriate remote control code for a
REMOTE MODE
button, by referring to the
previous section.
`
42157
:
Onkyo cassette tape deck with
u
`
81993
:
Onkyo Dock with
u
3
Press the
REMOTE MODE
button, point the
remote controller at the AV receiver, and operate
the component.
To be continued
Summary of Contents for HT-R358
Page 62: ...Appendix En 62 Memo...
Page 63: ...Appendix En 63 Memo...
