Advanced Operations
En-40
Tuner
■
AM Freq Step
`
10kHz
:
`
9kHz
:
Select the frequency step according to your area.
For AM tuning to work properly, you must specify the AM
frequency step used in your area.
Note
• When this setting is changed, all radio presets will be deleted.
Auto Standby
■
Auto Standby
`
Off
`
On
When “
Auto Standby
” is set to “
On
”, the AV receiver
will automatically enter standby mode if there is no
operation for 30 minutes with no audio and no video signal
input.
“
Auto Standby
” will appear on the AV receiver’s display
and OSD 30 seconds before the Auto Standby comes on.
Note
• Set to “
On
”, the Auto Standby function may activate itself during
playback with some sources.
UP-A1
■
UP-A1 ChargeMode
`
Auto
:
Power feeding is interrupted when your iPod/iPhone
is fully charged.
`
On
:
Power feeding continues even if your iPod/iPhone is
fully charged.
`
Off
:
Your iPod/iPhone is not charged.
You can specify how the power is fed to your iPod/iPhone
when the AV receiver is in Standby Mode.
Note
• This setting cannot be selected when:
– The UP-A1 Dock with docked iPod/iPhone is not connected to
the AV receiver, or
– The docked iPod/iPhone model is not supported.
• When the “
UP-A1 ChargeMode
” setting is set to “
On
”, or to
“
Auto
” with your iPod/iPhone recharging, the
SLEEP
indicator
is dimly lit in standby mode. In such conditions, the power
consumption of the AV receiver slightly increases. With “
Auto
”,
when the iPod/iPhone becomes fully charged, the
SLEEP
indicator goes off and the power consumption in standby mode is
reduced.
Summary of Contents for HT-R358
Page 62: ...Appendix En 62 Memo...
Page 63: ...Appendix En 63 Memo...