![background image](http://html.mh-extra.com/html/onkyo/fr-v77/fr-v77_instruction-manual_1637323037.webp)
37
Naming a CD, an MD and its tracks, and preset channels
Naming a CD
After you insert the CD and select CD for the
source, execute “Entering a name” as described
in the right column.
• You can enter up to 28 letters per name.
• You can name up to 16 CDs. The names will be
stored in memory. If you insert the same CD after
removing it, the unit will recognize the CD and
display its name.
Note
• You can name CDs only in normal playback mode.
Naming an MD disc or track
• You can enter up to 100 alphabetical characters per
name.
• As the name will be stored onto the MD disc, there
is no limit to the number of MDs.
• Use a recordable MD with the record-protect
window closed.
1
Insert the MD, then select MD as the
source.
2
To name the disc, go straight to Step
3
.
To name a track, select the track.
3
Execute “Entering a name” as described
in the right column.
Notes
• If the MD is record-protected or a playback-only disc, you
cannot name the disc. (See page 55.)
• Before naming the disc, check that no particular track is
selected. If a track is selected, press MD .
• You can name a track during recording or playback. Press
CD/MD to switch to the “MD” information display. Input the
track name before the track recording or playback is
ended. If recording or playback of the next track starts
before you finish naming the track, the input name will be
invalid.
• You can name the disc only in normal playback mode.
• Information such as names will be recorded to the TOC of
the MD when you eject the MD, turn off the unit, or stop
recording. Therefore, do not disconnect the AC power cord
(mains lead) or vibrate the unit when the TOC indicator is
lit or flashing. (See page 25.)
Naming a preset channel
After you select the preset channel to name,
execute “Entering a name” as described in the
right column.
You can enter up to 8 characters per name.
Entering a name
1
Press
EDIT
/CLEAR/NO
repeatedly until “Name In?”
appears in the display.
2
Press REPEAT/
YES
.
Whenever you wish to quit naming,
press and hold EDIT/CLEAR/NO, then
press REPEAT/YES.
3
Press DISPLAY repeatedly until
the character type you wish to
enter appears in the display.
You can select one of the following
character entry modes:
• “A” for capital letters
• “a” for small letters
• “1” for numbers and symbols
• “ ” for Easy Title* (see next page).
* This mode cannot be selected when
naming a preset channel.
4
Turn MULTI JOG to select the
character (or title when in Easy
Title mode), then press it to
enter.
Repeat this step for the next character.
If you wish to change the type of
characters, repeat Step 3, then
proceed with this step.
SLEEP
SOURCE
C D
TIMER
M D
M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
- 40
- 20
- 10
0 OVER
- 6
- 2
MUTING
DIGITAL
CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO
TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB
TOC
The character type appears.
SLEEP
SOURCE
C D
TIMER
M D
M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
- 40
- 20
- 10
0 OVER
- 6
- 2
MUTING
DIGITAL
CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO
TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB
TOC
M D
DISPLAY
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
(Continued on the next page)
“MD”
indicator
3
2, 5
4
1
/
EDIT / CLEAR
NO
REPEAT
YES