background image

2

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS 

OUVRIR

AVIS

1.

Read Instructions - All the safety and operating instructions should
be read before the appliance is operated.

2.

Retain Instructions - The safety and operating instructions should
be retained for future reference.

3.

Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.

4.

Follow Instructions - All operating and use instructions should
be followed.

5.

Water and Moisture - The appliance should not be used near
water - for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, and the like.

6.

Carts and Stands - The appliance should be used only with a
cart or stand that is recommended by the
manufacturer.

6A. An appliance and cart combination should

be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination
to overturn.

7.

Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.

8.

Ventilation - The appliance should be situated so that its location
or position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or if placed in a
built-in installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings, there should be
free space of at least 20 cm (8 in.) and an opening behind the
appliance.

9.

Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power

supply only of the type described in the operating instructions or
as marked on the appliance.

11. Polarization - If the appliance is provided with a polarized plug

having one blade wider than the other, please read the following
information:

The polarization of the plug is a safety feature. The polarized plug
will only fit the outlet one way. If the plug does not fit fully into the
outlet, try reversing it. If there is still trouble, the user should seek
the services of a qualified electrician. Under no circumstances
should the user attempt to defeat the polarization of the plug.

12. Power-Cord Protection - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items
placed upon or against them, especially near plugs, convenience
receptacles, and the point where they exit from the appliance.

13. Cleaning - The appliance should be cleaned only as recommended

by the manufacturer.

14. Power Lines - An outdoor antenna should be located away from

power lines.

15. Nonuse Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of
time.

16. Object and Liquid Entry - Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through
openings.

17. Damage Requiring Service - The appliance should be serviced

by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged; or

B.

Objects have fallen, or liquid has been spilled into the
appliance; or

C.

The appliance has been exposed to rain; or

D.

The appliance does not appear to operate normally or
exhibits a marked change in performance; or

E.

The appliance has been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.

Important Safeguards

S3125A

PORTABLE CART WARNING

Summary of Contents for FR-V77





























































Reviews: