n
Setting digital audio connections to an AV
amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier, receiver, or
external decoder. As there are numerous options available,
please refer to the instructions supplied with the component
the player is connected to determine what digital audio
formats can be decoded. If you have made no digital
connections, select [Not Connected].
Settings:
Dolby Digital
(Factory setting)
Dolby
Dolby
Dolby
PCM
Not Connected
Warning
Do not set [Digital Jack] to [Dolby
or [Dolby
M P E G ] i f t h e a m p l i f i e r d o e s n o t h a v e a D T S d e c o d e r . I f y o u d o
s o , h i g h v o l u m e s o u n d m a y b e o u t p u t a n d d a m a g e y o u r h e a r i n g
as well as speakers.
S e l e c t [ P C M ] w h e n y o u c o n n e c t t h e p l a y e r t o a 2 c h a n n e l d i g i t a l
s t e r e o a m p l i f i e r . I f y o u s e l e c t o t h e r t h a n [ P C M ] , h i g h v o l u m e
s o u n d m a y b e o u t p u t a n d d a m a g e y o u r h e a r i n g a s w e l l a s
speakers.
n
Setting compatibility with 96
output
The
PCM Audio] screen establishes whether or not
the AV component the player is connected to is capable of
processing an audio signal with a sampling rate of 96
This screen only appears if connections have been made to
an external AV component as determined in previous screens.
Settings: No (Factory setting)
Select if the connected AV component cannot
process an audio signal with a sampling rate of 96
Yes
Select if the connected AV component can process
an audio signal with a sampling rate of 96
Don’t Know
Select if you are uncertain whether the connected
AV component can process an audio signal with a
sampling rate of 96
n
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Changes are saved
Settings:
Save Changes
(Factory setting)
Select to have the player make all of the necessary
audio, video and language settings according to
your responses in the Setup Navigator.
Delete Changes
Select to exit the Setup Navigator without changing
any of the system settings.
Start Again
Select to return to the [OSD Language] screen of
the Setup Navigator and do the settings again.
n
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup screen
menus is described on page 46.