27
Getting Started
—Continued
Note:
• You may find with some DVD discs that some play-
back controls don’t work in certain parts of the disc.
This is not a malfunction.
The table below shows the basic controls on the remote
for playing discs. The following chapter covers other
playback features in more detail.
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
4
Press
(play) to start playback.
If you’re playing a DVD or Video CD, an
on-screen menu may appear. See “DVD
disc menus” on page 28 and “Video CD
PBC menus” on page 29 for more on
how to navigate these.
• If you’re playing an MP3/WMA disc,
it may take a few seconds before play-
back starts.
Remote
controller
Basic playback controls
Button
What it does
Starts playback.
If the display shows RESUME or LAST
MEM playback starts from the resume
or last memory point (see also
“Resume and Last Memory” on
page 28.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
See also “Resume and Last Memory”
on page 28.
(remote only)
Press to start fast reverse scanning.
Press
(play) to resume normal
playback.
(remote only)
Press to start fast forward scanning.
Press
(play) to resume normal
playback.
Skips to the start of the current track or
chapter, then to previous tracks/chapters.
Skips to the next track or chapter.
Numbers
(remote only)
Use to enter a title/chapter/track num-
ber.
Press ENTER to select.
• If the disc is stopped, playback starts
from the selected title (for DVD),
group (for DVD-Audio) or track (for
CD/SACD/Video CD).
• If the disc is playing, playback jumps
to the start of the selected title (VR
mode DVD-RW), chapter (DVD-
Video) or track (DVD-Audio
*1
/SACD/
CD/Video CD)
*1 within the current group
ON
STANDBY
PLAY
MODE
DISPLAY
DIMMER
MENU
SETUP
TOP MENU
RETURN
AUDIO
ANGLE SUBTITLE ZOOM
CLEAR
OPEN/
CLOSE
ENTER
1
2
3
6
7
8
9
0
4
5
/
/
Numbers
