![background image](http://html1.mh-extra.com/html/onkyo/cdr-205x/cdr-205x_operating-instructions-manual_1637820043.webp)
43
Other Information
Troubleshooting guide
Messages during recording (continued)
Display
Cause
Remedy
Repair
After recording, the disc was left in
While “Repair” is displayed, the
the CDR-205X when the power was
CDR-205X is tracing back through the
turned off and the track numbers and
recorded area and repairing the track
recording time data was lost.
numbers and recording time data.
When the message disappears,
finalization of the disc is possible.
Depending on the recording amount,
this process may take up to 40
minutes.recording time data was lost.
Disc Full
Either the disc is full of recordings or
Use a new disc.
99 tracks have been recorded and no
more recordings can be made on the disc.
Pro Disc
A CD-R not for music recording use
Eject the disc and check whether it meets
(without the "FOR CONSUMER" marking)
the specifications for use with the
or a CD-RW has been inserted.
CDR-205X. Always insert a disc that has .
the markings "FOR CONSUMER" or "FOR
MUSIC USE ONLY" on its surface
(see page 10).
Messages during playback
Display
Cause
Remedy
Blank Disc
You have tried to play a disc that has
If the inserted disc is a CD-R or CD-RW
no recordings on it.
with no recordings, you may record onto it,
but it cannot be played.
No Disc
No disc has been inserted.
Open the disc tray and make sure that a
disc is inserted (see page 16).
Now Setting
The CDR-205X is warming up.
Please wait.
Recovering
This is displayed after the power has been
Wait until the message disappears
or if the power is accidentally turned off
(see page 18).
during a recording, the CDR-205X will enter
this mode to repair the disc for additional
recordings.
Over
You reached the end of the disc
by pressing the search button during
playback or while the CDR-205X was paused.
Summary of Contents for CDR-205X
Page 50: ...50 Memo ...
Page 51: ...51 Other Information Memo ...