20
Basic Operation
To turn on the CBX-100, press the [STANDBY/ON]
button on the CBX-100 or remote controller. The
STANDBY indicator goes off.
Press the [STANDBY/ON] button again to set the
CBX-100 to Standby. The STANDBY indicator lights
up.
Tip:
When you turn on or start playback on an Onkyo RI
Dock that’s connected to the CBX-100 with an
cable and analog audio cable, the CBX-100 turns on
automatically.
Press the VOLUME Up [
] button to increase the vol-
ume or the VOLUME Down [
] button to decrease it.
You can also use remote controller’s VOLUME
[
]/[
] buttons.
The adjustable range is: Min, 1, 2, 3...39, 40, 41, Max.
You can select CD, FM, AM, or DOCK/LINE, which
can be an external component such as an Onkyo RI
DOCK.
To select the input source, press the remote controller’s
INPUT [
]/[
] buttons repeatedly. On the CBX-100,
press the [INPUT] button repeatedly. The input sources
are selected in the following order.
Turn down the volume, then connect your stereo head-
phones to the PHONES minijack.
You can adjust the volume and mute the sound as nor-
mal.
The speakers output no sound while the headphones are
connected.
VOLUME
STANDBY/ON
INPUT
STANDBY indicator
(front panel)
VOLUME
/
STANDBY/
ON
INPUT
/
PHONES
(rear panel)
Turning On the CBX-100
Adjusting the Volume
Remote
controller
CBX-100
Remote
controller
CBX-100
Selecting the Input Source
Using Headphones
CD
FM
AM
DOCK/LINE
PHONES jack
CBX-100_En.book Page 20 Friday, September 15, 2006 9:34 AM
