![background image](http://html.mh-extra.com/html/onkyo/c-1045/c-1045_instruction-manual_1638008064.webp)
Troubleshooting
—Continued
64
CD Player SETUP
Can’t find a SETUP menu in need.
• If any track has been selected even when the CD Player is stopped, you must place it into the full stop state by pressing
the [MENU] button before you can view all the SETUP menus.
USB Flash Device Playback
Can't access the music files on a USB Flash device.
• Make sure that the USB indicator light is on. If the light is not on, make sure that it is connected correctly and that the
USB Flash device is one that is supported (see pages 40).
• The stereo receiver supports USB Flash devices that support the USB Flash Class. However, playback may not be
possible with some USB Flash devices even if they conform to the USB Flash Class.
• Check that the memory format is FAT16 or FAT32.
• USB Flash devices with an internal USB hub are not supported.
Can't play MP3/WMA/AAC files.
• MP3/WMA/AAC files without a “.MP3/.WMA/.AAC” or “.mp3/.wma/.aac” filename extension are not recognized.
Tuner
Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn't
preset all stations, or the FM ST indicator doesn't light up when tuned to a stereo FM
station.
• Check the antenna connections (see pages 17 to 18).
• Change the position of the antenna (see page 43).
• Move the stereo receiver away from a nearby TV or computer.
• Cars or airplanes can cause noisy interference.
• The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.
• Try setting FM mode to mono (see page 43).
• Move power cords and speaker cables as far away as possible from the tuner’s antenna.
• When listening to an AM station, noise may be heard when you operate the remote controller.
• If none of the above improves the reception, install an outdoor antenna (see page 18).
If a power outage occurs or the power cable is disconnected:
• If the preset stations are lost, preset them again (see pages 48 to 49).
• The clock and timer settings will be lost. Set the clock and timers again (see pages 23, 55 to 56).
Can't adjust the frequency of the radio.
• Use the [
]/[
] buttons to change the frequency of the radio (see page 43).
RDS doesn't work.
• The FM station you are tuned to doesn’t support RDS.
• Install an outdoor FM antenna (see page 18).
• Change the position or direction of your outdoor FM antenna (see pages 18, 43).
• Move the FM antenna as far away as possible from fluorescent lights (see page 43).