40
Funzione di controllo
Problema
Controllare
Rimedio
La funzione di
controllo non
funziona.
Il cavo HDMI è collegato
correttamente?
Per usare la funzione Control, collegare il televisore a
schermo piatto ed il sistema AV (ricevitore o amplificatore
AV, ecc.) e il Convertitore AV HD al terminale HDMI OUT.
Il cavo HDMI usato è un
cavo High Speed HDMI
®
/
TM
?
Usare un cavo High Speed HDMI
®
/
TM
. La funzione Control
potrebbe non funzionare correttamente se viene utilizzato
un cavo HDMI diverso da High Speed HDMI
®
/
TM
.
Control with HDMI è
impostato su On sul
lettore?
Impostare Control with HDMI su On sul lettore.
Il dispositivo collegato
supporta la funzione
Control?
• La funzione Control non funziona con dispositivi di altre
marche che non la supportano, anche se si usa un cavo
HDMI.
• La funzione Control non funziona se dei dispositivi che
non la supportano vengono collegati fra dispositivi
compatibili con Control ed il lettore.
• Vedere Collegamenti a componenti di altre marche che
supportano la funzione Control a pagina 13.
• Alcune funzioni potrebbero non funzionare anche se
l'unità è collegata ad un prodotto Onkyo compatibile con la
funzione Control. Consultare anche le istruzioni per l'uso
del dispositivo collegato.
Problema
Controllare
Rimedio
Durante la riproduzione
di segnali DTS Digital
Surround dal terminale
DIGITAL AUDIO OUT
(OPTICAL) si sentono
dei disturbi.
Il ricevitore o amplificatore
AV collegato è compatibile
con DTS Digital
Surround?
Se al terminale DIGITAL AUDIO OUT (OPTICAL
) è
collegato un ricevitore o un amplificatore AV non
compatibile con DTS Digital Surround, impostare DTS
Digital Surround e HDMI Surround su PCM.
Il terminale DIGITAL
AUDIO OUT
(OPTICAL
) non è in
grado di emettere
segnali audio digitali
a 192 kHz o 96 kHz.
• L'audio protetto da diritti d'autore è convertito a 48 kHz
prima di essere emesso.
• Impostare Max Sampling Frequency a 96 kHz o
192 kHz.
L'audio secondario o
interattivo non viene
emesso.
HDMI Audio è impostato
correttamente?
Quando si ascolta audio da un terminale HDMI OUT,
impostare HDMI Audio su Reencode o PCM.
Digital Output è impostato
correttamente?
Quando si ascolta audio da un terminale DIGITAL AUDIO
OUT (OPTICAL), impostare Digital Output su Reencode o
PCM.
Dopo aver caricato il
disco, Loading
rimane visualizzato e
la riproduzione non
inizia.
Ci sono troppi file
registrati sul disco?
Se si carica un disco che contiene dei file, il tempo
richiesto per la sua riproduzione dipende dal numero di file
presenti.
■ appare nei nomi dei
file, ecc.
I caratteri non visualizzabili dal lettore appaiono come ■.
Quando si immettono caratteri tramite media e periferiche,
ecc., i caratteri comprendenti parzialmente o
completamente caratteri semplificati non vengono
visualizzati correttamente.
Un messaggio che
indica memoria
insufficiente appare
durante la
riproduzione di un
BD-ROM.
• Collegare un dispositivo USB.
• Cancellare i dati memorizzati nel dispositivo USB
collegato da BUDA Setup.
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 40
2015/10/20 14:37:03
Summary of Contents for BD-SP353
Page 310: ...46...
Page 311: ...47 Sv...