<Function Setup TACT Switches
Ⓐ
>
< REMOTE Connector
Ⓑ
>
Function key application by OSD (On Screen Display).
----
The button transferred the selected OSD to Left .
MENU
----
Enable MENU mode. The displayed to the OSD (On Screen display) menu.
----
The button transferred the selected OSD to right.
T( )
----
The button transferred the selected OSD to up.
<In case of using digital zoom function>
Push this button to “Zoom In”, to the tele field of view.
W( )
----
The button transferred the selected OSD to down.
<In case of using digital zoom function>
Push this button to “Zoom Out”, to the wide field of view.
Pin NO
Name
Description
1
R+
RS485 Communication data
2
R-
RS485 Communication Receive- data
3
D&N
Day & Night control out (
‘
H
’
= Night)
4
GND
Control GND
5
ALARM
Alarm Out (
‘
H
’
Out)
*. DVR Interface(RS485)
R+
R-
TRX+
TRX-
ALARM
ALARM
GND
D&N
IR LED Illuminator
5V/10mA
It is a terminal that controls the function of the camera at long distance.
The pin3(D&N) output the IR LED lamp on control signal by selecting the sensitivity of the CdS
sensor for Day & Night function. It is ‘H’ status output on the night mode.
The pin5(ALARM) is the motion detection output signal. It is ‘H’ status output on the recognition
mode.
20/28
ONS-620 HQ1 OSD Series
0V
0 V
Day mode
2.5sec over
+4.0V ∼ +5.0V
Night mode
0 V
Motion nothing
2.5±0.5sec
+4.0V ∼ +5.0V
Motion detection
Function
Command data
Byte
MENU
AA,EE,0F,CC,55
5
AA,EE,1E,CC,55
5
AA,EE,1D,CC,55
5
AA,EE,1B,CC,55
5
AA,EE,17,CC,55
5
<RS-485 Communication set>
-. Data Bit : 8 -. Bit/sec : 9600bps
-. Stop Bit : 1 -. Parity : None
-. Please camera power off to connect or disconnect “REMOTE” connecter.
-. Don’t connect to not used pin in the “REMOTE connecter.
Summary of Contents for ONS-620N HQ1 Dual OSD
Page 27: ... unit mm 27 28 Dimensions ...