6
Cleaning instruction
The heater requires regular cleaning to ensure trouble free operation:
•
Unplug the heater from the mains supply before cleaning.
•
Ensure that the heater has been allowed to cool down completely before cleaning.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.
•
Before cleaning the reflector, please remove the grill by unscrewing the four screws
at the front. The reflector body can be cleaned with a soft damp cloth, using a small
quantity of neutral detergent, taking care not to splash any water in the heater as
this can cause a short circuit or electric shock. Never use solutions such as benzene,
thinners or polishing agents. In order to get the maximum heat, the reflector must be
kept clean.
•
Use a vacuum cleaner to remove dust and fluff from around the grilles.
•
Ensure the heater is dry before plugging back into the mains supply.
CAUTION:
DO DOT IMMERSE OR EXPOSE THE UNIT, CORD OR PLUG TO WATER
OR ANY OTHER LIQUID
Storage
If you do not plan to use the heater for extended periods of time, it is recommended that
the heater is cleaned and then stored (preferably in its original packaging) in a cool dry
place.