Onix NGF-24DF Instruction Manual Download Page 3

2

• 

Do not connect the appliance to the mains voltage until completely assembled and 

adjusted. 

• 

This appliance is not intended for use in bathrooms, laundry areas and similar 

outdoor and indoor locations.

• 

Do not use this appliance in the immediate surrounds of a bath, a shower or a 

swimming pool or other liquids.

• 

Always operate on a flat horizontal surface.

• 

Switch off and use handles where provided when moving.

• 

Do not operate with cord set coiled up as a build up of heat is likely, which could be 

sufficient to become a hazard. 

• 

The use of an extension cord with this appliance is not recommended. 

• 

Do not remove plug from power socket until the appliance has been switched off. 

• 

Do not remove plug from power socket by pulling the supply cord - always grip plug. 

• 

Always unplug appliance when not in use. 

• 

CAUTION: This product is NOT suitable to be used on long pile carpets or flokati 

rugs. 

• 

Do not allow cord to come in contact with heated surfaces during operation. 

• 

Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away 

from traffic areas so that it will not be tripped over. 

• 

Do not twist, kink or wrap the cord around the appliance, as this may cause the 

insulation to weaken and split. Always ensure that all cord has been removed from 

any cord storage area. 

• 

Do not use outdoors or whilst standing on a damp floor.

• 

Do not store appliance while it is still hot. 

• 

This appliance is not intended for use by young children or infirm persons without 

supervision. 

• 

Young children should be supervised to ensure they do not play with the appliance. 

• 

The appliance must not be located immediately below a socket-outlet. 

• 

Do not use this appliance with a programmer, timer or any other device that 

switches the heater on automatically, since a fire risk exists if the appliance is 

covered or positioned incorrectly.

• 

The fireguard of this appliance is intended to prevent direct access to the heating 

elements and must be in place when the appliance is in use.

• 

“WARNING: In order to avoid overheating, do not cover the heater.”

• 

To reduce the risk of electric shock, do not immerse or expose the product or 
flexible cord to rain, moisture or any liquid other than those necessary for correct 

operation of the product.

Summary of Contents for NGF-24DF









Reviews: