5
When the desired room temperature is reached, turn the thermostat anticlockwise
until a “click” sound is heard. The thermostat will then automatically switch off the rear
element when the power knob is in position “1600W” and rear and front element s for
position “2400W”. For safety reason, the middle element will glow continuously.
If the room temperature drops below the desired comfort level, the thermostat will
automatically switch the rear element and the front element (for position “III” only) back
on and so forth, maintaining your desired comfort level.
Note:
The thermostat will only operate when the heat switch is in position “1600W”
and “2400W”.
FAN BOOST
To heat your room faster your Heater is equipped with a fan boost feature. This increases
the amount and the speed of the air traveling over the elements, therefore heating the
room area faster. This feature will operate when power knob is turned to the desired
heat setting. All the heat settings have this feature.
Note:
The “1600W” and “2400W” heat switches will not operate if the thermostat
setting is too low.
Hints when using the heater
A number of factors should be considered when using this heater.
•
Maintain a clearance of at least 1m from the unit (during operation) to prevent
contact burns.
•
This heater is not suitable to be used on long pile carpets or flokati rugs. Care
should be taken If the heater is used on short pile carpet, it is recommended to use a
thick piece of hardwood under the unit to prevent carpet from scorching.
•
The heater should be placed at least 1m away from combustible material such as
paper bins, desks, curtains, long pile carpet (to prevent fire).