![background image](http://html.mh-extra.com/html/onix/ch-2000d/ch-2000d_instruction-manual_1636208003.webp)
Using your Heater
Assembling the Heater
No assembly is required as the heater comes pre-assembled and ready-to-use,
however, please ensure feet are securely connected to the base of the heater.
However, if you wish to wall mount the heater, you will need to remove the feet
from the base (see picture), attach brackets securely to a wall, and attach heater
to brackets using the mounting holes that the feet used.
Using the Heater
1. Place the heater on a flat surface or securely mounted onto a wall, away from
flammable objects.
2. Plug the power cord into the wall socket when ready for use.
3. Turn either or both of the switches on to select the desired power output.
The first mode simply turns the fan on with no heat being produced. The first
switch outputs 750W while the other switch outputs 1250W. For high heat
have both switches turned on (2000W).
4. The ‘thermostat control’ controls the level of heat being emitted but is
dependent on the ‘heat setting’. Turn clockwise to increase the level of heat
being emitted. This function gives you the flexibility of selecting from a wider
range of heat levels at your fingertips.