Assembling the heater
Wall mount installation:
Your convection heater comes with a wall mounting kit. Please follow the step by
step instructions below to ensure your heater is properly installed.
NOTE:
The heater must be installed at least 1.8m above the floor if wall
mounted.
1. Locate the 4 wall mounting brackets in
the box.
2. Mark out the positions of the wall
mounting brackets on the wall as pictured
in the diagram on the right.
3. Dimensions noted in the diagram indicate
the distances from the centre of the screw
holes.
4. Once the wall mounting brackets are
secured to the wall, align the upper wall
mount anchor points on the back of the
heater as shown below to the wall mount
brackets.
Upper wall mount anchor point on back
of heater.
Heater sits on the lower wall mount
brackets and is secured with screws
provided