8
After Sales Support
Telephone:
1300 886 649
Email:
Getting Started
Before first use
• Unpack the product but keep all packaging materials until you have
made sure your new Action Camera Glasses are undamaged and in good
working order. Plastic wrapping can be a suffocation hazard for babies and
young children, so ensure all packaging materials are out of their reach.
• Unwind the cord of the power adaptor to its full length and inspect it for
damage. Do not use the product if any of its parts (power adaptor and USB
cable) have been damaged or are not working properly. In case of damage,
contact our after sales support line for advice.
• Read this manual to familiarise yourself with the product. Pay particular
attention to the safety instructions on the previous pages.
Charging and SD (TF) card installation
• The battery has been partially charged at the factory. To perform all
functions, we recommend you fully recharge before using it for the first
time.
• Insert the 2.5mm jack of the supplied cable into the charging socket on the
Action Camera Glasses.
• To charge via power adaptor,
insert the USB connector to the power
adaptor, then firmly insert the power adaptor into a properly earthed mains
socket.
• During charging, the status indicator flashes
red
. When the battery is fully
charged, the indicator light will turn
blue
. In order to maximise the battery’s
maximum storage capacity, continue charging the battery for 30 to 60
minutes after the indicator light remains on brightly.
• Once the glasses are charged and disconnected from the computer,
long-press the
Power On/Off
[ ] button to turn the glasses off.
• Before using the Action Camera Glasses for recording video or taking
photos, make sure you have installed an appropriate micro SD (TF) card
with a maximum storage capacity of 32GB.
IMPORTANT NOTE
This product is powered by a built-in high-capacity lithium polymer battery.
It can be used and charged at any time. However, for the initial
five
times
of charging, we recommend letting the battery run out completely and then
charging it to saturation. This is to activate the maximum battery capacity and
maintain the standard working time.
