9
1300 886 649
Model: ABVM-014 Product Code: 49335 02/2015
www.tempo.org
AUS
Getting Started (Cont.)
• Place the camera unit in a convenient location (e.g. on a table) and point
the camera lens towards the area you want to monitor. Alternatively, mount
the unit to a wall, as described below.
• Adjust the camera unit until you are satisfied with the image in the parent
unit.
NOTE
Do not place the baby unit within baby’s reach! If there is interference
on the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
Wall-mounting instructions
• Use the template on the right to mark
the wall in the correct places to drill
holes for wall-mounting screws.
• Insert 4mm head screws (not supplied)
into the holes and tighten the screws.
Then align the baby unit with the
screws and push it down.
• Point the camera lens towards the area
you want to monitor. Adjust the baby
unit until you are satisfied with the
image in the parent unit.
