![background image](http://html.mh-extra.com/html/onix/abvm-014/abvm-014_instruction-manual_1636184011.webp)
11
1300 886 649
Model: ABVM-014 Product Code: 49335 02/2015
www.tempo.org
AUS
Getting Started (Cont.)
Testing the video and audio monitor before use
It is important to check the camera and receiver units are working properly
when you are first setting it up, and at regular times thereafter. Also ensure
you test the units if they have not been used for a long time, or when you
suspect they are defective. To test:
• Place the receiver unit and the camera unit in the same room. Make sure
the camera unit is at least 1 metre away from the parent unit to avoid any
audio feedback. If you still experience audio feedback, move the parent
unit and the baby unit further apart.
• Turn on the camera unit and then the receiver unit. Wait until the receiver
unit pairs with the camera unit and the receiver unit displays the image
from the camera unit.
• Adjust the position and angle of the camera unit until you are satisfied with
the image on the receiver unit.
NOTE
• For better image quality, do not place the camera unit too far away
from your baby.
• You may need to turn the speaker volume louder on the receiver unit by
pressing the /Up button to hear the sounds transmitted from
the camera unit.
• The operating range of the video and audio monitor is up to 300m in
an open area. The actual operating range may vary depending on the
environmental conditions and other interference such as walls, doors
and other obstructions.