15
1300 886 649
Model: ABVM-014 Product Code: 49335 02/2015
www.tempo.org
AUS
FAQs
How do I know the camera unit is turned on?
About 5 seconds after connecting the camera unit to power, the green power
LED will come on.
How do I know the receiver unit is turned on?
• About 5 seconds after connecting the receiver unit to power, the display
will turn on in power saving mode and red power LED will come on.
• Press and hold the Power button for 3 seconds to turn on the unit.
The receiver unit shows "Connecting..." message on the display. What should
I do?
• Make sure the camera unit is connected to power.
• Move the receiver unit closer to the camera unit.
• Re-register the camera by following instructions on page 13.
• Disconnect the camera unit from power, wait for 10 seconds and
reconnect to power.
• Power off the receiver unit, wait for 10 seconds and turn the power on.
I cannot hear any sound. What should I do?
• Increase the volume level on the receiver unit.
• Increase the VOX sensitivity in the settings menu (see page 13)
• Move away from any electronic devices that may cause interference.
• Move closer to the camera unit as both devices may be out of range.
The video is lagging or breaking up.
To improve reception, move closer to the camera unit.
My receiver unit’s screen goes blank after 20 seconds. Why is that?
The receiver unit is set to VOX system mode and the LCD backlight timer
is set to 20 seconds, which will cause the LCD screen to turn off after 20
seconds. To keep the LCD screen always on, change the system mode to
‘Normal’ via settings menu (see page 14).
Is the video recorded so I can play it back later?
No, the unit does not record video; it only transmits it in real time.
