7
6
OPERATIONS
OPERATIONS
The FAN Mode:
1. Press "MODE" button to cyclically step through the AUTO, COOL, FAN, & DRY Modes and
stop when FAN mode is selected.
2.
symbol can be seen toward FAN word on the Remote panel when you select the FAN
mode.
3. In FAN mode, only FAN will run at set speed and Compressor remain OFF and FAN motor
will run continuously. Temperature display will goes off.
4. In this mode, you can change the FAN Speed, but you can not set the desired TEMP.
TIMER Operation:
You can program your Window AC to switch itself ON or OFF at particular time.
Maximum set time is 24 hrs. Up to 10 hrs, setting time increment will be 0.5 hrs & after 10 hrs
setting time increment will be 1 hrs.
ON TIMER:
When the AC is "OFF" (in standby), press "TIMER ON" Button on remote to use this feature as
the TIMER ON. (make sure that MCB switch is "ON". The "TIME ON" led on Unit will glow ON.
For EXAMPLE:
Suppose you want to switch ON the AC after 8 hrs. Press "TIMER ON" button, when AC is in
OFF condition. Press TIMER ON key till remote display will shows
"8HR”
to set the TIMER ON.
OFF TIMER:
When the AC is "ON", press "TIMER OFF" Button on remote to use this feature as the TIMER
OFF. The "TIME OFF" led on Unit will glow ON.
For EXAMPLE:
Suppose you want to switch OFF the AC after 8 hrs. Press "TIMER OFF" button, when AC is in
ON condition. Press TIMER OFF key till remote display will shows
"8HR”
to set the TIMER OFF.
ON/OFF TIMER Setting through Control Panel:
When the AC is "ON", press "TIMER" button on control panel, The “TIME OFF” led on unit will
glow ON. To set the time, for every 0.5hr increment press “TEMP” up/down keys.
When the AC is “OFF”, press “TIMER” button on control panel, The “TIME ON” led on unit will
glow ON. To set the time, for every 0.5hr increment press “TEMP” up/down keys.
Your Window AC operates in one of four modes,
COOL-FAN-DRY. The modes button
cyclically chooses between these operating modes.
The AUTO Mode :
1. Press "MODE" button to cyclically step through the AUTO-COOL-FAN-DRY modes and stop
when AUTO mode is selected.
2. symbol can be seen toward AUTO word on the Remote panel when you select the AUTO
mode.
3. In this mode, the fan speed is set to AUTO by default.
4. Temperature can be set in this mode.
5. In the AUTO mode, your AIR CONDITIONER "Thinks” for you.
The unit automatically and continuously monitors the difference between room temp. and
set temp. and adjusts the fan speed accordingly, to ensure maximum comfort.
The COOL mode:
In the cool mode, the compressor is in operation and your AC functions in the standard
operating mode, cooling your room to the desired set temp.
1. Press "MODE" button to cyclically step through the AUTO-COOL-FAN-DRY modes and
stop when cool mode is selected.
2.
symbol can be seen toward COOL word on the Remote panel when you select the cool
mode.
In this mode, you can change the temp. settings by pressing " " and “ ” temp. buttons.
You can change the fan speed setting by pressing FAN button.
3. If the Room temp. is more than the set temp., then the Compressor will remain ON and
perform the Cooling operation. If the room temp. achieves the temp. less than set temp.,
then the Compressor will goes OFF and FAN motor will run continuously.
The DRY Mode:
In the DRY mode, your AC reduces the humidity within the room faster.
O
When the room temp. is more than 17 C then only the DRY mode operates.
1. Press "MODE" button to cyclically step through the AUTO-COOL-FAN-DRY modes and
stop when DRY mode is selected.
2.
symbol can be seen toward DRY word on the Remote panel when you select the DRY
mode.
3.
AUTO-
In DRY mode, Indoor FAN will run at low speed, the compressor & outdoor fan will remain
ON until it reaches the set temperature. After reaching the set temperature, the
compressor & outdoor fan will be OFF.
4. In this mode, No fan speed indicator display and you can not change the FAN Speed, but
you can set the desired TEMP.
