![Onida W12TRC2 User Manual Download Page 13](http://html.mh-extra.com/html/onida/w12trc2/w12trc2_user-manual_1636114013.webp)
19
18
TAKE CARE OF YOUR
AIR CONDITIONER
Air Filter
Drainage
SEAL
DRAIN
JOINT
RUBBER
PLUG
The air filter behind the inlet grill should be checked and
cleaned at least once every 2 weeks (or as necessary) to
maintain optimal performance of the air conditioner.
How to remove the air filter:
1. Hold the slot under the front panel, then uplift it outwards, and
remove the front panel.
2. Pinch the handle under the air filter and make the air filter
arched, remove it from the slot from underside to upside.
3. Clean the filter with warm, soapy water. The water should be
0
below 40 C to prevent distortion of the filter.
4. Rinse off and gently shake off excess water from the filter,
Allow the filter to dry before replacing it. To prevent distortion
of the filter, do not dry in direct sunlight.
To meet different requirement of different type of air conditioner,
there are two kinds of methods for your choice to treat the
condensed water.
For Cooling Only Models:
You can choose back drainage or non-drainage. See the
following procedures to perform back drainage:
1. Fit the seal onto the drain joint (which provided with your air
conditioner accessory).
2. Remove the rubber plug from the back of the unit.
3. Attach the drain joint to the back of the cabinet, where you
0
remove the plug and rotate 90 to securely assemble them.
4. Connect the drain joint with a extension drain hose (Locally
purchased).
Do's (
)
• Seal all air gaps in the room
• Choose the right temperature to avoid over cooling
• Ventilate the room regularly.
• Switch off the power supply if not in use for long.
• Unplug the unit while cleaning.
Don't's (
)
• Don't leave the doors and windows open when the air conditioner is on.
• Don't use hot water to clean your front grill
• Don't use scouring powder, harsh soaps, wax or polish on the grill.
• Don't switch on the air conditioner immediately after switching it off.
Wait for 2 minutes.
• Don't operate with a clogged filter
• Don't block air intake & outlet vents
• Don't change setting unnecessarily.
PRECAUTIONS TO BE TAKEN
X