3
Warning
No modification of this equipment is allowed.
Important safeguards and notices for use in the medical
environments
The unit generates, uses, and may radiate radio frequency energy. If it is not installed and used in accordance
with the instruction manual, it may cause interference on other devices. If the unit causes interference
(which can be determined by disconnecting the power cord from the unit), try the following.
–
Relocate the unit with respect to the affected devices.
–
Connect the unit and the affected devices to different branch circuits.
Caution
Signal input and output ports can only be connected with device with double insulation.
On Cleaning
Before cleaning
Be sure to disconnect the AC power cord from the AC outlet.
On cleaning the device
A material that withstands disinfection is used for the device housing and screen. When solvents such as
benzene or thinner, or acid, alkaline or abrasive detergent, or chemical cleaning cloth are used for the
housing surface/screen surface, the performance of the screen may be impaired or the finish of the housing
surface may be damaged. Take care with respect to the following:
Clean the housing surface/screen surface with a 50 to 70 v/v% concentration of isopropyl alcohol or a 76.9
to 81.4 v/v% concentration of ethanol using a swab method. Wipe the protection plate surface gently (wipe
using less than 1 N force). Stubborn stains may be removed with a soft cloth such as a cleaning cloth lightly
dampened with mild detergent solution using a swab method and then clean using the above chemical
solution. Never use solvents such as benzene or thinner, or acid, alkaline or abrasive detergent, or chemical
cleaning cloth for cleaning or disinfection, as they will damage the housing surface/screen surface. Do not
use unnecessary force to rub the housing surface/screen surface with a stained cloth. The housing
surface/screen surface may be scratched.
Do not keep the housing surface/screen surface in contact with a rubber or vinyl resin product for a long
period of time. The finish of the surface may deteriorate or the coating may come off.