background image

11

TESTING YOUR BLOOD GLUCOSE

Lancing and sampling from an alternate site

Sampling from your palm or forearm allows you to use your fingertips less often. You may find that obtaining a blood sample from an 
alternate site is less painful than using a fingertip. Getting a blood sample from your forearm or palm is different than getting a sample from 
your fingertips.

 Insert a sterile lancet and snap on the clear cap 

 Adjust the depth setting

You may have to adjust the lancing device to a deeper setting to get a large enough 
drop of blood from your forearm or palm. Twist the clear cap toward the larger 
numbers to increase the depth.

Be sure to cock the lancing device.

 Puncture your forearm or palm

Firmly press and hold the lancing device against your forearm or palm for a few 
seconds. 

Wait until the skin surface under the clear cap changes color  

(as blood collects beneath the skin). This tells you there is enough blood 

flow for a good sample.

 Then press the release button while continuing to apply 

pressure. Keep holding the lancing device against your skin until a round drop of 
blood forms under the cap. 

Remember: Consult with your healthcare professional before using your forearm or palm for testing.
Choose a different puncture site each time you test. Repeated punctures in the same spot may cause soreness and calluses. If bruising occurs at 
an alternate site or you have difficulty getting a sample, consider sampling from a fingertip instead. You may want to review the choice of sites 
with your healthcare professional.

Forearm sampling

Choose a fleshy area of the forearm away from bone, visible veins and hair. 
Sometimes there is less blood flow to the forearm than to the fingertips. To help you 
get a large enough drop of blood, you may gently massage or apply warmth to the 
site to increase blood flow.

Palm sampling

Choose a fleshy area on the palm below your thumb or little pinky finger.  
Select a spot with no visible veins and away from deep lines, which may cause  
your blood sample to smear.

The clear cap is used for forearm and palm sampling only. Replace the blue (or black) cap with the clear cap.

Palm

Forearm

Palm

Forearm

Summary of Contents for Ultra Mini
































Reviews: