-6-
oneQ B.V. 2022
one-q.com
WOK AND SIDE BURNER ASSEMBLY TO oneQ LEGS
The burner hangs loose in the slot of the stand. Choose an accessible place for you to install the controls in the preparation
of the burner.
Ü
figure A
Carefuly release the wok and side burner in the slot of the stand.
Ü
figure B
Place the wok burner lid, knob and battery into the appliance
.
CONNECTION GAS BOTTLE
The oneQ gasburner is suitable for both propane and propane / butane (gas). We advise you to use standard 5 or 10 kg
cylinders. Use a regulator that matches the pressure indicated on the date plate (EN16129).
Ü
figure C
Place the cylinder on ground, then attach the hose to the gas tap by turning/ tighten the nut.
The valve has a standard 1/4” LH connection.
OPERATION AND FIRST USE
The appliance is fully assembled and properly adjusted at the delivery by the manufacturer. In the first use of the wok and
side burner it is
important that you completely remove all packaging materials.
Ü
figure D
Press the control knob and turn it to the left to the ignition position until the burners are
burning completely.
Depending on the type of gas and gas pressure the oneQ burner has a load of 6,5kW. The burnerpower can be adjusted
with the knob.
TROUBLESHOOTING
Failures
Possible Cause
Solution
Burner will not ignite
- ignitionpin dirty
clean pin
or does not burn
- cylinder (almost) empty
replace cylinder
completely.
- hose kinked
remove kink
- restriction air intake manifold
release air intake
- burner tubes are wet (after cleaning)
leave to dry
- Defective pressure regulator
replace
Ü
figure E
The air intake at the bottom of the manifold should have an unobstructed air input. If there is
dirt in it you should remove it.
If the problem remains unresolved then contact your oneQ supplier.
CLEANING & MAINTENANCE
We recommend cleaning the burner after each use. Check all areas where oil, grease or food residue may accumulate, then
you keep all parts in optimal condition.
SERVICE, WARRANTY AND CERTIFICATIONS
If you have problems with your oneQ wok and side burner or if you want to order (reserve) parts, contact your dealer or
see
www.one-q.com, where you find an extensive customer service section.
The oneQ wok and side burner measures up to the NEN-EN 484 standard for wok burner and is certified by the world-
renowned KIWA GASTEC testing station for gas appliances.
ONEQ B.V.
