35
Chapter 3:
Using Easy Print Mode
O’Neil Programming Language Reference Manual
Configure CardReader {CCR:nnn}
Original
MF2, MF3, 2t, 4t
Radio Ready
2t, 3l, 4t
{
A left bracket begins the command set.
CCR:
nnn
The CCR command requires data only to
configure the general way the card reader
uses the LED indicators when reading a card.
Use the following information:
nnn
= HOST: The host needs to control the
LEDs be sending the appropriate commands
to turn the red and green LEDs off, on, or to
flashing.
nnn
= AUTO: The printer controls the LEDs
and beeper. All tracks enabled must read
“good” to get the green LED and two beeps
indicating a good read.
nnn
= AUTO1: The printer controls the LEDS
and beeper. Any one track must read “good”
to obtain the green LED and two beeps
indicating a good read.
X
}
A right bracket ends the command set.
Summary of Contents for microFlash2
Page 3: ......
