17
oneida-air.com
FAQ (Continued)
How many tools can I collect from simultaneously?
We recommend to run one tool with a 4" or 5" port at a time. If you have mutlitple tools connect to your system,
close off the ports to unused tools with blast gates when they are not in use.
Do you have a ductwork kit that includes everything I need to get started?
Yes, we have a Mini-Gorilla Quick-Start Ductwork Kit (KDZ010100) that includes:
a. DHF051000: Ten feet of 5" flex hose
b. ACB060000: Two 3-6" clamps
c. DZX990504: One 5-4" reducer crimped on the 5" end.
Can I connect Flex Hose directly to the inlet?
Yes, it will be a secure and firm fit.
I'm having trouble attaching flex hose to the inlet, do you have any tricks?
Start with the cut end of the hose and pull the hose ends up little by little to work the hose onto the cyclone’s
discharge. Pliers can be used to grab the reinforcing wire and aid in pulling the hose over the opening. Using
heat (such as a hair dryer) can be gently applied to the molded inlet to make the resin more malleable and allow
for easier hose fittings - exercise caution when heat-treating so as not to damage the system.
What's the furthest length and diameter of hose that I can run?
You can run up to twenty-five feet of five inch flex hose.
Summary of Contents for Mini-Gorilla
Page 2: ......
Page 23: ...21 oneida air com Notes...
