XI. Accessories
O.A.S. 2002
c
5HP High Pressure Owners Manual
Dust Bin Options -
(Must Order Custom Mounting Stand.)
2. Hoppers -
Large capacity hoppers from .5 cu. yd. to 3 cu. yd.
3/16 reinforcing angle for added support - 3/16 plate body is
100% continuously MIG welded on inside - 3/8 rear cross brace
angle (not 3/16) - three 3 base channel - All angles are structural
not formed.
3. Air Locks -
Rotary air locks provide an alternative to an air tight dust bin
for larger volume capacity and less maintenance.
Example - A 10 air lock will drop 1.85 cu. ft. / rev. of material.
1. Multiple Drums -
Custom order the System Mounting Stand for multiple drums
or hoppers. Stand widths will vary depending on dust container.
Magnetic Motor Starters -
The 5hp high pressure dust collectors
do not come wired or with an on/off switch. Because of the
voltage and amperage requirements of the system, an
industrial switch must be used.
OAS offers Square D Full Voltage Non-Reversing across
the Line Starters, Nema Type 1 Enclosure with Start/Stop in
cover, and class 10 overload. Industrial switches can also be
purchased through your local electrician. Due to varying
electrical codes, OAS cannot specify exact wiring requirements.
When wiring the collector you should always hire a licensed
electrician.
Bin Level Monitor -
Provides level sensing for dry bulk solids.
The monitor operates by using a 1 rpm synchronous motor
to rotate a paddle.
When paddle rotation is impeded by material surrounding it,
the motor is de-energized and triggers a SPDT snap switch.
The snap switch can be used in conjunction with a motor
starter to turn equipment off or provide alarm functions.
11
