15
EN
Seaweed
Seaweed is also displayed. The approximate height is also displayed; from low
(left) to high (right).
Unevenness on the ground is also displayed; from low (left) to high (right).
MOUNTING THE SONAR SENSOR
Pull out the rubber stopper and position the float so
that it is min. 18-25cm or at the desired depth from
the sensor. Replace the rubber stopper. Now you
can leave the sensor in the water. The sensor must
not be thrown into the water. The cable must not be
knotted or tangled.
The scope of delivery also includes a holder, which
may be tilted up to 180 °. This allows the sensor
to be securely attached to a boat or other fixed
surface.
